FINAL TOUCH CLASSIC LUXURY SILK SHEEN EMULSION

PRODUCT INFORMATION:
Drying Time                                         :              2-3 hours between coats coverage
Coverage                                               :             11-16 m2/1itre/coat Application
Thinner                                                 :              Clean Water
Roller/Brush                                        :             50-75%
Spray                                                      :            25%
No. of Coats                                          :             2-3
Cleaning                                                :            Clean all equipment with water
PREPARATION REQUIRED:

Surface must be clean, dry and free from efflorescent salts, After priming with Final Touch Silk Sheen Emulsion, fill surface With a mixture Of 4 parts chalk, 1 part lithopone and 3-4 parts Final Touch Silk Sheen Emulsion to give it a paste like constancy. Allow the filler to dry overmighty. Remove all defective of poorly adhering material by rubbing down using a suitable abrasive paper and dust Off. Spot prime and fill surface as describe above if required. Make good minor defects. For large holes and cracks use sand and cement mixture. Allow to dry overnight. Stogy surface using abrasive paper and dust off. After preparation apply   coats Of Final Touch Silk Sheen Emulsion, STIRE THOROUGHLY BEFORE USE contains on added lead or mercury.

TYPICAL SURFACES:
New or bare surfaces
Previously painted surfaces
Powdery dusty Surfaces cricks and other surfaces defects