Sale!

NEW DELUXE GOLD SERIES RED OXIDE PRIMER

From:  790

+ Free Shipping

TECHNICAL INFORMATION:

Drying Time : Touch Dry : 6-12 hours.

(Depending on temperature and humidity)   Hard Dry: Maximum 14 hours.

Recoating Interval : 16 Hours.
Coverage : 14-16m2 per liter per coat.

(May vary depending on the substrate conditions)

No. of Coats : 1-2

For Optimum Results

(Steel and Iron) : Apply 1 coat of New Deluxe Red Oxide Primer / of   New Deluxe Undercoat / Economy Undercoat before / applying New Deluxe Super Gloss Enamel. For Optimum Results

PRODUCT INTRODUCTION:

New Deluxe  Red Oxide Primer is specially designed for interior and exterior use on iron and steel. The ferrous pigments used are ideally suited for protection of structural steelwork and other metalwork where an economical finish with protection is required. It is easy to apply and has a good coverage property.

APPLICATION New Surfaces

All the surface must be free from rust, grease, oil and other contaminants. It must be dry at the time of application.

Previously painted surfaces:

Any loose and flaking paint film must be scraped off. Defective areas should be sanded and smoothened. The entire surface must finally be dry and free from dirt. Grease and other contaminants.

HOW TO USE:

  • Stir well before use.
  • Application can be done by brush, roller or spray.
  • Thin (by volume) up to 10-15% with White Spirit or Mineral Turpentine for brush or roller application, 20-25% for conventional air spray.
  • Clean up all equipment with White Spirit or Mineral Turpentine immediately after use.
Size

, ,

Reviews

There are no reviews yet.

Be the first to review “NEW DELUXE GOLD SERIES RED OXIDE PRIMER”

Your email address will not be published. Required fields are marked *

Shopping Cart

Your Order

No products in the cart.

No products in the cart.

Scroll to Top